This forum is intended for questions about kinetics, Surface Plasmon Resonance and the instruments related to these techniques.
Spikes before and after injection
- shubhamG
- Topic Author
- Visitor
-
2 years 10 months ago #1
by shubhamG
Spikes before and after injection was created by shubhamG
i am trying to kinetics analysis and in am seeing spikes before and after injection. there is RI changes but i have changed the buffer, Cleaned the system and also checked with different flow rate but i am not able to get rid of the spikes. because of that i am not able to analyse the kinetics data
Please Log in or Create an account to join the conversation.
- Arnoud
- Visitor
-
2 years 10 months ago #2
by Arnoud
Replied by Arnoud on topic Spikes before and after injection
Hi,
In general spikes occur when buffers are not matched. This is more prone when the difference is larger. Also, when you subtract the reference without alingning the curves you can get spikes.
So how are your raw data?
And do you have spikes when injecting a buffer only sample?
Some analysis programs can cut out the unwanted parts of the curve (e.g. the spikes) during sata processing.
Arnoud
In general spikes occur when buffers are not matched. This is more prone when the difference is larger. Also, when you subtract the reference without alingning the curves you can get spikes.
So how are your raw data?
And do you have spikes when injecting a buffer only sample?
Some analysis programs can cut out the unwanted parts of the curve (e.g. the spikes) during sata processing.
Arnoud
Please Log in or Create an account to join the conversation.
- shubhamG
- Topic Author
- Visitor
-
2 years 10 months ago #3
by shubhamG
Replied by shubhamG on topic Spikes before and after injection
thank for your response. spikes occurs only after after subtracting my active cell with me reference cell
Please Log in or Create an account to join the conversation.
Moderators: Arnoud, Arnoud